1.213,49 €
WesAudio LC-EQP, a single channel passive equalizer with a tube amplifying stage. The equalizer input system is based on a Carnhill linear transformer which matching input impedance. The input impedance is > 1.5 kohm. It Is higher than in similar class devices. As a result, the equalizer does not load the signal source, by which it is controlled.
Esaurito
Email to a friend "]Descrizione
The equalization block is a passive system based on coils, resistors and capacitors. The block has been expanded with additional bands for LOW and HIGH section. The EQ section introduces a high attenuation, exceeding 25dB. A signal regenerative amplifier is a tube system, based on two triodes. The amplifier has been designed without feedback which does not distort transients. The equalizer output is symmetrical. A Carnhill transformer is responsible for output symmetrization, which provides a low output impedance. The anode and heater voltage are stabilized. WesAudio LC-EQP is powered by alternating current 230V / 115V, which can be selected by a voltage selector. The casing is 2U rack made of 1.5mm stainless steel whereas the aluminum front panel is 4mm. LOW section has separate boost regulations and frequency cut offering six bands. HIGH BOOST section has a selection of 12 bands and a regulation of Q factor . HIGH CUT section is equipped with 6 bands. An EQ IN switch is a “True Bypass” type. Switching the equalizer is indicated by a red LED.
WesAudio LC-EQP sound can be described as clean and clear with a tube nature. It is an ideal equalizer on both, single tracks and the sum. LC-EQP WesAudio handles well controlling other studio devices thanks to low output impedance. It was designed as a universal musical equalizer to use in professional recording studios.
Specifications :
Gain: 0dB (+/- 0.5dB)
Input impedance: >1.5kohm
Output impedance: 150ohm
Max. output level: +22dBu (0.8% THD)
Frequency response: 5Hz – 65kHz (-3dB)
SNR ratio: 90dB
LOW BOOST: max +18dB
LOW CUT: max -18dB
HIGH BOOST: max +20dB
HIGH CUT: max -18dB
LOW BOOST: 20, 30, 60, 100, 120, 250 Hz
LOW CUT: 20, 30, 60, 100, 120, 250 Hz
HIGH BOOST: 1, 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20 kHz
HIGH CUT: 2, 4, 6, 12, 16, 20 kHz
AC mains: 115(60Hz) / 230V(50Hz)
Transformer balanced output and input (XLR Neutrik)
Case Rack 2U
Dimensions : 88 x 483 x 237 mm
Weight: 7 kg
3 years warranty
Rispondi
Modalità di Pagamento
Il tuo ordine può essere completato con diverse modalità di pagamento:
- Bonifico Bancario anticipato
- Carta di Credito
- PayPal
Prezzi
Digiland ha estrema cura dei prezzi pubblicati sul sito, non possiamo però escludere i rari casi in cui alcuni prodotti possano avere un prezzo diverso da quello corretto - per errori di varia natura commerciale. Nel caso in cui il prodotto dovesse riportare un prezzo inferiore a quello corretto, verrai immediatamente contattato per verificare se desideri procedere ugualmente con l'acquisto al prezzo di vendita esatto - altrimenti il tuo ordine non potrà essere confermato. Nel caso di un annullamento ordine ma avvenuto pagamento (con Carta di Credito, Paypal), verrai rimborsato. I prezzi possono essere soggetti a cambiamento senza preavviso.
Garanzia
Tutti i prodotti presenti sul sito sono coperti dalla garanzia ufficiale della casa produttrice o dell'importatore. Le parti Hardware considerate "materiale di consumo" non sono soggette a garanzia. Essa copre i privati per 24 mesi, 12 mesi per i titolari di Partita IVA richiedenti fattura. Nel caso di danni causati da cattivo utilizzo, installazioni erronee e non curanza relativa alle indicazioni fornite dai manuali - la garanzia non può essere applicata.
Per maggiori informazioni, visualizza le pagine complete su Condizioni di Vendita e Diritto di Recesso.
Recensioni
Ancora non ci sono recensioni.